RipCart™ Demolition Tool

Long cuts made easier, safer, and faster

RipCart™ is a demolition tool that allows you to make cuts without hunching or crawling. Users set the blade depth, walk behind the cart like a push lawn mower, and easily control the circular saw.

Depth Guide

To set the depth of the saw blade, adjust the depth guide to one of the four predetermined settings which include one, two, or three layer, or the entire roof deck. Use the fine adjustment for more precise changes to blade depth.

Fits Most Circular Saws

The RipCart™ accepts most popular brands of contractor grade circular saws. Use the ratchet strap and saw table lock to secure the circular saw to the RipCart™ mount base.

Power Management

The RipCart™ momentary switch controls power to the circular saw by cutting off the electrical source when the switch is released.

Wheel Alignment & Blade Guide

The secondary wheels stabilize the RipCart when making edge cuts. This is perfect for cutting ridge vent openings and for cutting back overlaid shingles on hips and ridges. Also, the primary front wheel acts as a perfect guide when cutting ridge vent openings.

Wheel Lock

As a safely feature, the wheels are always locked unless the wheel lock handle is depressed.

Easy Transportation & Storage

The collapsable handle allows the RipCart™ to quickly convert from storage position to operating position. Weighing only 32 lbs without a saw and approximately 42 lbs with a saw, the RipCart™ is light weight and easy to maneuver.

How others use RipCart™

RipCart™ is great for many cutting and demolition applications. See how customers use it.

Commercial Roofing

  • Cutting in curbs
  • Cutting under air units
  • Cutting out old gravel stop
  • Small areas of Tar & Gravel

Residential Roofing

  • Cutting ridge vent openings
  • Roof Deck Demolition
  • Cutting through two or three layers of shingles and nails in one pass
  • For total roof demolition including plywood and shingles
  • For cutting through ice shield
  • Cutting small flat roof tear off
  • Cutting through Shingles, Ice Shield & Nails

Miscellaneous

  • Wood floor tear outs
  • Plywood
  • Removing old decking

See an application from this list?
We'd love to hear how you have used RipCart™ →

Don't take our word for it...

Read what other customers have said after cutting with RipCart™.

Thomas Esperanza, Specialty Roofing, Waipahu, Hawaii

RipCart saves our crew two hours a day, which is about half the tear off time. It tears off a lot quicker and cleaner so the debris isn't everywhere. We love it. I cut the roof up into squares and it comes up clean and is easy to carry away.

Chuck Evans, Scholten Roofing, Escondido, CA

RipCart works great for small jobs, because I don’t have to get out my big cutter, but I wondered how it would work cutting 2000 lineal feet of heavy asphalt in the hot Arizona sun. Well, it worked great and didn't bog down or gum up!

Brandon Campbell, A Touch Above Inc, Warwick, Rhode Island

RipCart has been reel handy thus far I have used it twice to date both times to remove hardwood and plywood sub floors. I am certain it will be used quite often whenever we have water damage losses that entail removing wood floors. The saw is good, it cut the wood smoothly and neatly it allowed us to remove it much easier.

FAQs

  • Can the RipCart™ fit any circular saw?

    RipCart™ fits all 7 1/4" circular saws except the Milwaukee which has a large head.

  • How do you carry the RipCart™?

    If it is folded up and if the a saw is in it, grab it by the saw handle. If there is no saw in it, grab it by the front axle.

  • Does the RipCart™ collapse for transportation and storage?

    Yes. The handle collapses and stores tightly and compactly.

See all FAQs →

30 Day Money Back Guarantee

We understand your skepticism. We have all been burned by products that don't live up to their claims. That is why RipCart™ comes with a 30 day money back guarantee.

RipCart™ Demolition Tool

Price: From $499 | Shipping Cost: $35 | Ships: within 24 hours

Buy Now